Instruction Manual for Xbox One Wireless Controller

Android

  • *     It is only for Xbox One Bluetooth controller/Xbox Elite wireless controller Series 2
  • *     required system: Android 4.0 or above
  • *     OTG support is required on your Android device
  • *     analog triggers and trigger vibration are not supported

  • 1.     Connect the USB Wireless Adapter to your Android device.
  • 2.     Press  pair  button on the USB Wireless Adapter, LED starts to blink rapidly.
  • 3.     Press  Xbox  button to turn on the controller, then press  pair  button for 3 seconds to enter its pairing mode (this is required for the very first time only).
  • 4.     LED becomes solid when connection is successful.
  • *     controller will auto reconnect with the press of  Xbox  once it has been paired.

Button mapping

macOS

  • *     It is only for Xbox One Bluetooth controller/Xbox Elite wireless controller Series 2
  • *     required system: OS Yosemite (10.10) or above

  • 1.     Connect the USB Wireless Adapter to your macOS device.
  • 2.     Press  pair  button on the USB Wireless Adapter, LED starts to blink rapidly.
  • 3.     Press  Xbox  button to turn on the controller, then press  pair  button for 3 seconds to enter its pairing mode (this is required for the very first time only).
  • 4.     LED becomes solid when connection is successful.
  • *     controller will auto reconnect with the press of  Xbox  once it has been paired.

Button mapping

PlayStation Classic

  • *     It is only for Xbox One Bluetooth controller/Xbox Elite wireless controller Series 2
  • *     rumble, analog triggers are not supported

  • 1.     Connect the USB Wireless Adapter to your PlayStation Classic.
  • 2.     Press  pair  button on the USB Wireless Adapter, LED starts to blink rapidly.
  • 3.     Press  Xbox  button to turn on the controller, then press  pair  button for 3 seconds to enter its pairing mode (this is required for the very first time only).
  • 4.     LED becomes solid when connection is successful.
  • *     controller will auto reconnect with the press of  Xbox  once it has been paired.

Button mapping

Mega Drive mini / Genesis mini

  • *     It is only for Xbox One Bluetooth controller/Xbox Elite wireless controller Series 2
  • *     rumble, analog triggers are not supported

  • 1.     Connect the USB Wireless Adapter to your Mega Drive mini/Genesis mini device.
  • 2.     Press  pair  button on the USB Wireless Adapter, LED starts to blink rapidly.
  • 3.     Press  Xbox  button to turn on the controller, then press  pair  button for 3 seconds to enter its pairing mode (this is required for the very first time only).
  • 4.     LED becomes solid when connection is successful.
  • *     controller will auto reconnect with the press of  Xbox  once it has been paired.

Button mapping

Advanced mode

  •     Press the button combos below for 3 seconds to enter advanced mode:
  •     VIEW + UP  = Xinput mode
  •     VIEW + LEFT  = Dinput mode
  •     VIEW + RIGHT  = Mac mode
  •     VIEW + DOWN  = PSC mode
  •     VIEW + L1  = Switch mode
  •     VIEW + UP + LEFT  = MD mode

  • *     Press the  pair  button on the USB Wireless Adapter till LED turns off to cancel advanced mode (controller needs to be re-paired).

Ultimate Software

  •     Please visit support.8bitdo.com/ultimate-software.html for the application. It gives you elite control over every piece of your controller: customize button mapping, adjust stick & trigger sensitivity, vibration control and create macros with any button combination.

Support