Instruction Manual for Xbox One Wireless Controller

Switch

  • *     Go to  System Setting > Controller and Sensors > turn on Pro Controller Wired Communication
  • *     It is only for Xbox One Bluetooth controller / Xbox Elite wireless controller Series 2 / Xbox Adaptive Controller
  • *     Switch system needs to be 3.0.0 or above
  • *     analog triggers are not supported
  • 1.     Connect the USB Wireless Adapter to your Switch dock.
  • 2.     Press  pair  button on the USB Wireless Adapter, LED starts to blink rapidly.
  • 3.     Press  Xbox  button to turn on the controller, then press  pair  button for 3 seconds to enter its pairing mode (this is required for the very first time only).
  • 4.     LED becomes solid when connection is successful.
  • *     controller will auto reconnect with the press of  Xbox  once it has been paired.

Button mapping (Switch Controller)

FAQ

    Manual setting
  • Press the button combos below for 3 seconds to enter manual setting（LED will blink twice），USB Wireless Adapter will not switch mode automatically.
  •     Press the button combos below for 3 seconds to enter advanced mode:
  •     VIEW + UP  = Xinput mode
  •     VIEW + LEFT  = Dinput mode
  •     VIEW + RIGHT  = Mac mode
  •     VIEW + DOWN  = PSC mode
  •     VIEW + LB  = Switch mode
  •     VIEW + UP + LEFT  = MD mode
  • * Press pair button on the USB Wireless Adapter till LED turns off to cancel manual setting（controller needs to be re-paired）
    How do I connect an Xbox wireless controller to an Xbox console after pairing with the USB Wireless Adapter?
    Why the button layout is opposite?
  • Because Nintendo Switch button layout is opposite from the Xbox button layout.
    Does the headphone jack work via the USB Adapter?
  • No, it does not work.