Analogue Dock 8BitDo

FirmwareUpdater

Bluetooth Controllers

Pro 2

Manual
- 1. Put the mode switch on the controller to X
- 2. Press START button to turn on the controller, LED lights 1, 2 start to blink
- 3. Press and hold PAIR button for 3 seconds to enter pairing mode, LED lights start to rotate from left to right (this is required for the first time pairing only)
- 4. Press the Dock button to enter its pairing mode
- 5. LED lights on the controller and Dock will become solid when pairing is successful
- * Controller will auto reconnect to Dock next time once it has been paired

SN30 Pro G Classic

SN30 Pro

Manual
- 1. Press X + START buttons to turn on the controller, LED lights 1, 2 start to blink
- 2. Press and hold PAIR button for 2 seconds, LED blinks once then starts to rotate, controller enters pairing mode
- 3. Press the Dock button to enter its pairing mode
- 4. LED lights on the controller and Dock will become solid when pairing is successful
- * Controller will auto reconnect to Dock next time once it has been paired

Arcade Stick

Manual
- 1. Put the power switch on arcade stick to BT
- 2. Put the mode switch on arcade stick to X, LED blinks
- 3. Press the Dock button to enter its pairing mode
- 4. LED lights on the controller and Dock will become solid when pairing is successful
- * Arcade Stick will auto reconnect to Dock next time once it has been paired

Zero 2

Manual
- 1. Press X + START buttons to turn on the controller, blue LED blinks twice
- 2. Press and hold SELECT button for 3 seconds to enter pairing mode, LED blinks rapidly
- 3. Press the Dock button to enter its pairing mode
- 4. LED lights on the controller and Dock will become solid when pairing is successful
- * Controller will auto reconnect to Dock nest time once it has been paired

Lite

Manual
- 1. Put the mode switch on the controller to X
- 2. Press HOME button to turn on the controller, LED lights 1, 2 start to blink
- 3. Press and hold PAIR button for 2 seconds, LED lights blink once then starts to rotate, controller enters pairing mode
- 4. Press the Dock button to enter its pairing mode
- 5. LED lights on the controller and Dock will become solid when pairing is successful
- * Controller will auto reconnect to Dock next time once it has been paired

M30 Bluetooth^®

Manual
- 1. Press X + START buttons to turn on the controller, LED lights 1, 2 start to blink
- 2. Press and hold PAIR button for 2 seconds, LED lights blinks once then starts to rotate, controller enters pairing mode
- 3. Press the Dock button to enter its pairing mode
- 4. LED lights on the controller and Dock will become solid when pairing is successful
- * Controller will auto reconnect to Dock next time once it has been paired

SN30 Pro+

Manual
- 1. Press X + START buttons to turn on the controller, LED lights 1, 2 start to blink
- 2. Press and hold PAIR button for 2 seconds, LED blinks once then starts to rotate, controller enters pairing mode
- 3. Press the Dock button to enter its pairing mode
- 4. LED lights on the controller and Dock will become solid when pairing is successful
- * Controller will auto reconnect to Dock next time once it has been paired

SN30 Retro Set

Manual
- 1. Press X+START button to turn on the controller, LED blinks
- 2. Press and hold SELECT button for 3 seconds to enter pairing mode, LED blinks rapidly
- 3. Press the Dock button to enter its pairing mode
- 4. LED lights on the controller and Dock will become solid when pairing is successful
- * Controller will auto reconnect to Dock next time once it has been paired

Manual
Firmware
for Analogue Dock

N30 NS

Manual

Firmware

for Analogue Dock

- 1. Press START button to turn on the controller, LED blinks
- 2. Press and hold SELECT button for 3 seconds to enter pairing mode, LED blinks rapidly
- 3. Press the Dock button to enter its pairing mode
- 4. LED lights on the controller and Dock will become solid when pairing is successful
- * Controller will auto reconnect to Dock next time once it has been paired

2.4g Controllers

For Analogue Dock only. Please update the firmware back to its standard version for other systems

Manual
Firmware
for Analogue Dock

SN30 2.4G Nt

Manual

Firmware

for Analogue Dock

- 1. Extract the zip file.
- 2. Hold down the start button for 3 seconds to turn off the controller.(Skip this step if the controller is already powered off)
- 3. Hold down L & R at the same time, then press start button to enter upgrade mode, blue and yellow LEDs start to blink.
- 4. Connect the controller to PC via USB cable.
- 5. The controller will be recognized as an USB flash drive.
- 6. Copy the [SN30_Fw_V1.22_81AD_For_Analogue.dat] file and paste it to the USB flash drive(The controller), then wait till the completion.
- 7. Unplug the USB cable.
- 8. Hold down start button for 3 seconds until all LEDs turn off, upgrade complete.
- 1. Extract the zip file.
- 2. Hold down the start button for 3 seconds to turn off the controller.(Skip this step if the controller is already powered off)
- 3. Hold down L & R at the same time, then press start button to enter upgrade mode, blue and yellow LEDs start to blink.
- 4. Connect the controller to PC via USB cable.
- 5. The controller will be recognized as an USB flash drive.
- 6. Search for the keyword terminal, double click terminal to open it.
- 7. In terminal, input the text 'cp' and space.
- 8. Drag the [SN30_Fw_V1.22_81AD_For_Analogue.dat] file to terminal.
- 9. Drag the USB flash drive(The controller) to terminal.
- 10. Press the Enter key of keyboard, wait 2 seconds.
- 11. Unplug the USB cable.
- 12. Hold down start button for 3 seconds until all LEDs turn off, upgrade complete.
- 1. Press start button to turn on the controller.
- 2. Hold down the select button for 3 seconds to enter its pairing mode, blue LED flashes rapidly.
- 3. Press the Dock button to enter its pairing mode.
- 4. The blue LED of the controller stays solid when the connection is successful.

Manual
Firmware
Analogue Dock

N30 2.4G Nt

Manual

Firmware

for Analogue Dock

- 1. Extract the zip file.
- 2. Hold down the start button for 3 seconds to turn off the controller.(Skip this step if the controller is already powered off)
- 3. Hold down select button, then press start button to enter upgrade mode, blue and yellow LEDs start to blink.
- 4. Connect the controller to PC via USB cable.
- 5. The controller will be recognized as an USB flash drive.
- 6. Copy the [N30_Fw_V6.01_For_Analogue.dat] file and paste it to the USB flash drive(The controller), then wait till the completion.
- 7. Unplug the USB cable.
- 8. Hold down start button for 3 seconds until all LEDs turn off, upgrade complete.
- 1. Extract the zip file.
- 2. Hold down the start button for 3 seconds to turn off the controller.(Skip this step if the controller is already powered off)
- 3. Hold down select button, then press start button to enter upgrade mode, blue and yellow LEDs start to blink.
- 4. Connect the controller to PC via USB cable.
- 5. The controller will be recognized as an USB flash drive.
- 6. Search for the keyword terminal, double click terminal to open it.
- 7. In terminal, input the text 'cp' and space.
- 8. Drag the [N30_Fw_V6.01_For_Analogue.dat] file to terminal.
- 9. Drag the USB flash drive(The controller) to terminal.
- 10. Press the Enter key of keyboard, wait 2 seconds.
- 11. Unplug the USB cable.
- 12. Hold down start button for 3 seconds until all LEDs turn off, upgrade complete.
- 1. Press start button to turn on the controller.
- 2. Hold down the select button for 3 seconds to enter its pairing mode, blue LED flashes rapidly.
- 3. Press the Dock button to enter its pairing mode.
- 4. The blue LED of the controller stays solid when the connection is successful.

Manual
Firmware
for Analogue Dock

PCE 2.4G

Manual

Firmware

for Analogue Dock

- 1. Extract the zip file.
- 2. Hold down the home button for 3 seconds to turn off the controller.(Skip this step if the controller is already powered off)
- 3. Hold down select button, then press home button to enter upgrade mode, blue and yellow LEDs start to blink.
- 4. Connect the controller to PC via USB cable.
- 5. The controller will be recognized as an USB flash drive.
- 6. Copy the [PCE_Fw_V5.00_For_Analogue.dat] file and paste it to the USB flash drive(The controller), then wait till the completion.
- 7. Unplug the USB cable.
- 8. Hold down home button for 3 seconds until all LEDs turn off, upgrade complete
- 1. Extract the zip file.
- 2. Hold down the home button for 3 seconds to turn off the controller.(Skip this step if the controller is already powered off)
- 3. Hold down select button, then press home button to enter upgrade mode, blue and yellow LEDs start to blink.
- 4. Connect the controller to PC via USB cable.
- 5. The controller will be recognized as an USB flash drive.
- 6. Search for the keyword terminal, double click terminal to open it.
- 7. In terminal, input the text 'cp' and space.
- 8. Drag the [PCE_Fw_V5.00_For_Analogue.dat] file to terminal.
- 9. Drag the USB flash drive(The controller) to terminal.
- 10. Press the Enter key of keyboard, wait 2 seconds.
- 11. Unplug the USB cable.
- 12. Hold down home button for 3 seconds until all LEDs turn off, upgrade complete.
- 1. Press home button to turn on the controller.
- 2. Hold down the select button for 3 seconds to enter its pairing mode, blue LED flashes rapidly.
- 3. Press the Dock button to enter its pairing mode.
- 4. The blue LED of the controller stays solid when the connection is successful.

Manual
Firmware
for Analogue Dock

it is only for genesis mini

M30 2.4G

Manual

Firmware

for Analogue Dock

it is only for genesis mini

- 1. Extract the zip file.
- 2. Hold down the start button for 3 seconds to turn off the controller.(Skip this step if the controller is already powered off)
- 3. Hold down L & R at the same time, then press start button to enter upgrade mode, blue and yellow LEDs start to blink.
- 4. Connect the controller to PC via USB cable.
- 5. The controller will be recognized as an USB flash drive.
- 6. Copy the [M30_Mini_81CC_Fw_V3.00_For_Analogue.dat] file and paste it to the USB flash drive(The controller), then wait till the completion.
- 7. Unplug the USB cable.
- 8. Hold down start button for 3 seconds until all LEDs turn off, upgrade complete.
- 1. Extract the zip file.
- 2. Hold down the start button for 3 seconds to turn off the controller.(Skip this step if the controller is already powered off)
- 3. Hold down L & R at the same time, then press start button to enter upgrade mode, blue and yellow LEDs start to blink.
- 4. Connect the controller to PC via USB cable.
- 5. The controller will be recognized as an USB flash drive.
- 6. Search for the keyword terminal, double click terminal to open it.
- 7. In terminal, input the text 'cp' and space.
- 8. Drag the [M30_Mini_81CC_Fw_V3.00_For_Analogue.dat] file to terminal.
- 9. Drag the USB flash drive(The controller) to terminal.
- 10. Press the Enter key of keyboard, wait 2 seconds.
- 11. Unplug the USB cable.
- 12. Hold down start button for 3 seconds until all LEDs turn off, upgrade complete.
- 1. Press start button to turn on the controller.
- 2. Hold down the select button for 3 seconds to enter its pairing mode, blue LED flashes rapidly.
- 3. Press the Dock button to enter its pairing mode.
- 4. The blue LED of the controller stays solid when the connection is successful.

Manual
Firmware
for Analogue Dock

M30 2.4G

Manual

Firmware

for Analogue Dock

- 1. Extract the zip file.
- 2. Hold down the start button for 3 seconds to turn off the controller.(Skip this step if the controller is already powered off)
- 3. Hold down L & R at the same time, then press start button to enter upgrade mode, blue and yellow LEDs start to blink.
- 4. Connect the controller to PC via USB cable.
- 5. The controller will be recognized as an USB flash drive.
- 6. Copy the [M30_81CA_Fw_V3.00_For_Analogue.dat] file and paste it to the USB flash drive(The controller), then wait till the completion.
- 7. Unplug the USB cable.
- 8. Hold down start button for 3 seconds until all LEDs turn off, upgrade complete.
- 1. Extract the zip file.
- 2. Hold down the start button for 3 seconds to turn off the controller.(Skip this step if the controller is already powered off)
- 3. Hold down L & R at the same time, then press start button to enter its upgrade mode, blue and yellow LEDs start to blink.
- 4. Connect the controller to PC via USB cable.
- 5. The controller will be recognized as an USB flash drive.
- 6. Search for the keyword terminal, double click terminal to open it.
- 7. In terminal, input the text 'cp' and space.
- 8. Drag the [M30_81CA_Fw_V3.00_For_Analogue.dat] file to terminal.
- 9. Drag the USB flash drive(The controller) to terminal.
- 10. Press the Enter key of keyboard, wait 2 seconds.
- 11. Unplug the USB cable.
- 12. Hold down start button for 3 seconds until all LEDs turn off, upgrade complete.
- 1. Press start button to turn on the controller.
- 2. Hold down the select button for 3 seconds to enter pairing mode, a blue LED flashes rapidly.
- 3. Press the Dock button to enter its pairing mode.
- 4. The blue LED of the controller stays solid when the connection is successful.

Manual
Firmware
for Analogue Dock

N30 2.4G

Manual

Firmware

for Analogue Dock

- 1. Extract the zip file.
- 2. Hold down the start button for 3 seconds to turn off the controller.(Skip this step if the controller is already powered off)
- 3. Hold down select button, then press start button to enter upgrade mode, blue and yellow LEDs start to blink.
- 4. Connect the controller to PC via USB cable.
- 5. The controller will be recognized as an USB flash drive.
- 6. Copy the [N30_Fw_V6.01_For_Analogue.dat] file and paste it to the USB flash drive(The controller), then wait till the completion.
- 7. Unplug the USB cable.
- 8. Hold down start button for 3 seconds until all LEDs turn off, upgrade complete.
- 1. Extract the zip file.
- 2. Hold down the start button for 3 seconds to turn off the controller.(Skip this step if the controller is already powered off)
- 3. Hold down select button, then press start button to enter upgrade mode, blue and yellow LEDs start to blink.
- 4. Connect the controller to PC via USB cable.
- 5. The controller will be recognized as an USB flash drive.
- 6. Search for the keyword terminal, double click terminal to open it.
- 7. In terminal, input the text 'cp' and space.
- 8. Drag the [N30_Fw_V6.01_For_Analogue.dat] file to terminal.
- 9. Drag the USB flash drive(The controller) to terminal.
- 10. Press the Enter key of keyboard, wait 2 seconds.
- 11. Unplug the USB cable.
- 12. Hold down start button for 3 seconds until all LEDs turn off, upgrade complete.
- 1. Press start button to turn on the controller.
- 2. Hold down the select button for 3 seconds to enter its pairing mode, blue LED flashes rapidly.
- 3. Press the Dock button to enter its pairing mode.
- 4. The blue LED of the controller stays solid when the connection is successful.

Manual
Firmware
for Analogue Dock

SN30 2.4G

Manual

Firmware

for Analogue Dock

- 1. Extract the zip file.
- 2. Hold down the start button for 3 seconds to turn off the controller.(Skip this step if the controller is already powered off)
- 3. Hold down L & R at the same time, then press start button to enter upgrade mode, blue and yellow LEDs start to blink.
- 4. Connect the controller to PC via USB cable.
- 5. The controller will be recognized as an USB flash drive.
- 6. Copy the [SN30_Fw_V1.22_81AB_For_Analogue.dat] file and paste it to the USB flash drive(The controller), then wait till the completion.
- 7. Unplug the USB cable.
- 8. Hold down start button for 3 seconds until all LEDs turn off, upgrade complete.
- 1. Extract the zip file.
- 2. Hold down the start button for 3 seconds to turn off the controller.(Skip this step if the controller is already powered off)
- 3. Hold down L & R at the same time, then press start button to enter upgrade mode, blue and yellow LEDs start to blink.
- 4. Connect the controller to PC via USB cable.
- 5. The controller will be recognized as an USB flash drive.
- 6. Search for the keyword terminal, double click terminal to open it.
- 7. In terminal, input the text 'cp' and space.
- 8. Drag the [SN30_Fw_V1.22_81AB_For_Analogue.dat] file to terminal.
- 9. Drag the USB flash drive(The controller) to terminal.
- 10. Press the Enter key of keyboard, wait 2 seconds.
- 11. Unplug the USB cable.
- 12. Hold down start button for 3 seconds until all LEDs turn off, upgrade complete.
- 1. Press start button to turn on the controller.
- 2. Hold down the select button for 3 seconds to enter its pairing mode, blue LED flashes rapidly.
- 3. Press the Dock button to enter its pairing mode.
- 4. The blue LED of the controller stays solid when the connection is successful.

{{item}}

Submit