Ultimate 2 Bluetooth Controller FAQ
-
Instructions for calibrating the joysticks/triggers:
- Please follow the steps below:
- 1. Controller in the powered-on state, press and hold the LB+RB+Minus+Plus buttons for 8 seconds to enter the calibration mode, the Status LED will start to blink.
- 2. Push the joysticks to the edge and rotate them slowly 2–3 times. Slowly press the triggers to the bottom 2–3 times.
- 3. Press the same LB+RB+Minus+Plus buttons combination again to complete the calibration.
-
How to enable the zero-dead zone mode on the joysticks?
- Please visit app.8bitdo.cn/Ultimate-Software-V2 download the software to make adjustments.
-
Are the RGB lighting effects adjustable?
- Yes, you can customize the RGB lighting effects using Ultimate Software V2. Visit app.8bitdo.cn/Ultimate-Software-V2 download the software to make adjustments.
-
Is it possible for multiple controllers to pair and connect with one adapter?
- No, each adapter can only support one controller connection at a time.
-
What joysticks are equipped on the Ultimate 2 Bluetooth Controller?
- TMR Joysticks.
{{item}}
