Ultimate 3-mode Controller for Xbox - Rare FAQ
  • Instructions for calibrating the joysticks/triggers
    • Please follow the steps below:
    • Calibrate via Software:
    • 1. Download and launch Ultimate Software X from the Microsoft Store. Please visit https://apps.microsoft.com/
    • 2. Connect the controller to your Windows or Xbox device via wireless or wired connection.
    • 3. Go to the "Sticks" or "Triggers" section and click "Calibrate".
    • 4. Follow the on-screen instructions to complete calibration.

    • Calibrate Directly:
    • 1. Controller in the powered-on state, press and hold the [LB+RB+View+Menu] buttons for 8 seconds to enter the calibration mode, the Status LED will start to blink.
    • 2. Push the joysticks to the edge and rotate them slowly 2-3 times.
    • 3. Slowly press the triggers to the bottom 2-3 times.
    • 4. Press the same [LB+RB+View+Menu] buttons combination again to complete the calibration.
  • Is the controller supported by the Ultimate Software for iOS / Android?
    • Yes,it is.
  • Does the controller support the turbo or macro function?
    • No, it does not.
  • Is it possible for multiple controllers to pair and connect with one adapter?
    • No, it is not.
  • Does the controller support firmware updates on the Xbox console?
    • Yes, please access the [Ultimate Software X] for any further firmware updates of the controller.
  • Why does the SHARE button not working on Windows 10 devices?
Submit