Instruction Manual for DualSense (PS5) Wireless Controller

Windows

  • *     required system: Windows 10 (1903) or above
  • *     motion controls is not supported
  • 1.     Connect the USB Wireless Adapter to your Windows device.
  • 2.     Press  pair  button on the USB Wireless Adapter, LED starts to blink rapidly.
  • 3.     Press  CREATE+PS  button for 3 seconds to enter its pairing mode (this is required for the very first time only).
  • 4.     LED becomes solid when connection is successful.
  • *     Controller will auto reconnect with the press of  PS  once it has been paired.

Button mapping (Xbox Controller)

FAQ

    Manual setting
  • Press the button combos below for 3 seconds to enter manual setting（LED will blink twice），USB Wireless Adapter will not switch mode automatically.
  •     Press the button combos below for 3 seconds to enter advanced mode:
  •     CREATE + UP  = Xinput mode
  •     CREATE + LEFT  = Dinput mode
  •     CREATE + RIGHT  = Mac mode
  •     CREATE + DOWN  = PSC mode
  •     CREATE + L1  = Switch mode
  •     CREATE + UP + LEFT  = MD mode
  • * Press pair button on the USB Wireless Adapter till LED turns off to cancel manual setting（controller needs to be re-paired）
    How do I connect DualSense wireless controller to a PS5TM console after pairing with the USB Wireless Adapter?
    Is touchpad click button available?
  • No, it is not available.
    Are adaptive triggers supported?
  • No, adaptive triggers are not supported.
    Does the headphone jack work via the USB Adapter?
  • No, it does not work.
Submit