Instruction Manual for DualSense (PS5) Wireless Controller

Android

  • *     required system: Android 4.0 or above
  • *     OTG support is required on your Android device
  • *     motion controls and analog triggers are not supported
  • 1.     Connect the USB Wireless Adapter to your Android device.
  • 2.     Press  pair  button on the USB Wireless Adapter, LED starts to blink rapidly.
  • 3.     Press  CREATE+PS  button for 3 seconds to enter its pairing mode (this is required for the very first time only).
  • 4.     LED becomes solid when connection is successful.
  • *     Controller will auto reconnect with the press of  PS  once it has been paired.

Button mapping (Android Controller)

macOS

  • *     required system: OS Yosemite (10.10) or above
  • *     motion controls is not supported
  • 1.     Connect the USB Wireless Adapter to your macOS device.
  • 2.     Press  pair  button on the USB Wireless Adapter, LED starts to blink rapidly.
  • 3.     Press  CREATE+PS  button for 3 seconds to enter its pairing mode (this is required for the very first time only).
  • 4.     LED becomes solid when connection is successful.
  • *     Controller will auto reconnect with the press of  PS  once it has been paired.

Button mapping (MFi Controller)

PlayStation Classic

  • *     motion controls, rumble, analog triggers are not supported
  • 1.     Connect the USB Wireless Adapter to your PlayStation Classic.
  • 2.     Press  pair  button on the USB Wireless Adapter, LED starts to blink rapidly.
  • 3.     Press  CREATE+PS  button for 3 seconds to enter its pairing mode (this is required for the very first time only).
  • 4.     LED becomes solid when connection is successful.
  • *     Controller will auto reconnect with the press of  PS  once it has been paired.

Button mapping (PS Classic Controller)

Mega Drive mini / Genesis mini

  • *     motion controls, rumble, analog triggers are not supported
  • 1.     Connect the USB Wireless Adapter to your Mega Drive mini/Genesis mini device.
  • 2.     Press  pair  button on the USB Wireless Adapter, LED starts to blink rapidly.
  • 3.     Press  CREATE+PS  button for 3 seconds to enter its pairing mode (this is required for the very first time only).
  • 4.     LED becomes solid when connection is successful.
  • *     Controller will auto reconnect with the press of  PS  once it has been paired.

Button mapping (MD mini Controller)

Manual setting

  • Press the button combos below for 3 seconds to enter manual setting（LED will blink twice），USB Wireless Adapter will not switch mode automatically.
  •     CREATE + UP  = Xinput mode
  •     CREATE + LEFT  = Dinput mode
  •     CREATE + RIGHT  = Mac mode
  •     CREATE + DOWN  = PSC mode
  •     CREATE + L1  = Switch mode
  •     CREATE + UP + LEFT  = MD mode
  • * Press pair button on the USB Wireless Adapter till LED turns off to cancel manual setting（controller needs to be re-paired）

Ultimate Software

  •     Please visit support.8bitdo.com/ultimate-software.html for the application. It gives you elite control over every piece of your controller: customize button mapping, adjust stick & trigger sensitivity, vibration control and create macros with any button combination.

Support
Submit