Instruction Manual for Switch Joy-Con Controller

Android

  • *     required system: Android 9.0 or above
  • *     OTG support is required on your Android device
  • *     Motion control, NFC scanning, IR camera, HD rumble, notification LED, player indicator are not supported
  • *     Only one Joy-Con can be connected, hold horizontally
  • 1.     Connect the USB Wireless Adapter to your Android device.
  • 2.     Press  pair  button on the USB Wireless Adapter, LED starts to blink rapidly.
  • 3.     Press  SYNC  button for 3 seconds to enter its pairing mode (this is required for the very first time only).
  • 4.     LED becomes solid when connection is successful.
  • *     controller will auto reconnect with the press of any button once it has been paired.

Button mapping (Android Controller)

macOS

  • *     required system: OS Yosemite (10.10) or above
  • *     Motion control, NFC scanning, IR camera, HD rumble, notification LED, player indicator are not supported
  • *     Only one Joy-Con can be connected, hold horizontally
  • 1.     Connect the USB Wireless Adapter to your macOS device.
  • 2.     Press  pair  button on the USB Wireless Adapter, LED starts to blink rapidly.
  • 3.     Press  SYNC  button for 3 seconds to enter its pairing mode (this is required for the very first time only).
  • 4.     LED becomes solid when connection is successful.
  • *     controller will auto reconnect with the press of any button once it has been paired.

Button mapping (MFi Controller)

PlayStation Classic

  • *     Motion control, NFC scanning, IR camera, HD rumble, notification LED, player indicator are not supported
  • *     Only one Joy-Con can be connected, hold horizontally
  • 1.     Connect the USB Wireless Adapter to your PlayStation Classic.
  • 2.     Press  pair  button on the USB Wireless Adapter, LED starts to blink rapidly.
  • 3.     Press  SYNC  button for 3 seconds to enter its pairing mode (this is required for the very first time only).
  • 4.     LED becomes solid when connection is successful.
  • *     controller will auto reconnect with the press of any button once it has been paired.

Button mapping (PS Classic Controller)

Mega Drive mini / Genesis mini

  • *     Motion control, NFC scanning, IR camera, HD rumble, notification LED, player indicator are not supported
  • *     Only one Joy-Con can be connected, hold horizontally
  • 1.     Connect the USB Wireless Adapter to your Mega Drive mini/Genesis mini device.
  • 2.     Press  pair  button on the USB Wireless Adapter, LED starts to blink rapidly.
  • 3.     Press  SYNC  button for 3 seconds to enter its pairing mode (this is required for the very first time only).
  • 4.     LED becomes solid when connection is successful.
  • *     controller will auto reconnect with the press of any button once it has been paired.

Button mapping (MD mini Controller)

FAQ

    Manual setting
  • Press the button combos below for 3 seconds to enter manual setting（LED will blink twice），USB Wireless Adapter 2 will not switch mode automatically.

  • Joy-Con (L)
  •     - Button + UP  = Xinput mode
  •     - Button + LEFT  = Dinput mode
  •     - Button + RIGHT  = Mac mode
  •     - Button + DOWN  = PSC mode
  •     - Button + L  = Switch mode
  •     - Button + UP + LEFT  = MD mode

  • Joy-Con (R)
  •      HOME + UP  = Xinput mode
  •      HOME + LEFT  = Dinput mode
  •      HOME + RIGHT  = Mac mode
  •      HOME + DOWN  = PSC mode
  •      HOME + L  = Switch mode
  •      HOME + UP + LEFT  = MD mode

  • * Automatic mode switch supports Windows and Switch only. Press the button combos to switch other modes.
  • * Press pair button on the USB Wireless Adapter till LED turns off to cancel manual setting（controller needs to be re-paired）
    How do I connect Switch Joy-Con to a Switch after pairing with the USB Wireless Adapter 2?
    Are NFC scanning and notification LED supported?
  • No, they are not supported.
Submit