Instruction Manual for Xbox Series and Xbox One Wireless Controller

Switch

  • *     Go to  System Setting > Controller and Sensors > turn on Pro Controller Wired Communication
  • *     Switch system needs to be 3.0.0 or above
  • *     Supports Xbox One Controller / Xbox Elite Wireless Controller Series 2 with Bluetooth only
  • *     Trigger vibration, audio jack, analog trigger, NFC scanning, IR camera, HD rumble, notification LED, player indicator are not supported, nor can the system be waken up.
  • 1.     Connect the USB Wireless Adapter to your Switch dock.
  • 2.     Press  pair  button on the USB Wireless Adapter, LED starts to blink rapidly.
  • 3.     Press  Xbox  button to turn on the controller, then press  pair  button for 3 seconds to enter its pairing mode (this is required for the very first time only).
  • 4.     LED becomes solid when connection is successful.
  • *     controller will auto reconnect with the press of Xbox once it has been paired.

Button mapping (Switch Controller)

Ultimate Software

  • Please visit https://support.8bitdo.com/ultimate/usb-adapter-2.html for the application. It gives you elite control over every piece of your controller: customize button mapping, adjust stick & trigger sensitivity, vibration control and create macros with any button combination.

Safety Warnings

  • * Please always use batteries, chargers, and accessories provided by the manufacturer.
  • * The manufacturer is not liable for any safety issues arising from the use of non-manufacturer-approved accessories.
  • * Do not attempt to disassemble, modify, or repair the device yourself. Unauthorized actions may result in serious injury.
  • * Avoid crushing, disassembling, puncturing, or attempting to modify the device or its battery, as these actions can be dangerous.
  • * Any unauthorized changes or modifications to the device will void the manufacturer's warranty.

FAQ

    Manual setting
  • Press the button combos below for 3 seconds to enter manual setting（LED will blink twice），USB Wireless Adapter 2 will not switch mode automatically.

  •     VIEW + UP  = Xinput mode
  •     VIEW + LEFT  = Dinput mode
  •     VIEW + RIGHT  = Mac mode
  •     VIEW + DOWN  = PSC mode
  •     VIEW + LB  = Switch mode
  •     VIEW + UP + LEFT  = MD mode

  • * Automatic mode switch supports Windows and Switch only. Press the button combos to switch other modes.
  • * Press pair button on the USB Wireless Adapter 2 till LED turns off to cancel manual setting（controller needs to be re-paired）
    How do I connect an Xbox wireless controller to an Xbox console after pairing with the USB Wireless Adapter 2？
    Why the button layout is opposite?
  • Because Nintendo Switch button layout is opposite from the Xbox button layout.
    Does the headphone jack work via the USB Adapter?
  • No, it does not work.
Submit