Instruction Manual for Xbox Series and Xbox One Wireless Controller

Windows

  • *     required system: Windows 10 (1903) or above
  • *     Supports Xbox One Controller / Xbox Elite Wireless Controller Series 2 with Bluetooth only
  • *     Trigger vibration and audio jack are not supported
  • 1.     Connect the USB Wireless Adapter to your Windows device.
  • 2.     Press  pair  button on the USB Wireless Adapter, LED starts to blink rapidly.
  • 3.     Press  Xbox  button to turn on the controller, then press  pair  button for 3 seconds to enter its pairing mode (this is required for the very first time only).
  • 4.     LED becomes solid when connection is successful.
  • *     controller will auto reconnect with the press of Xbox once it has been paired.

Button mapping (Xbox Controller)

Ultimate Software

  • Please visit https://support.8bitdo.com/ultimate/usb-adapter-2.html for the application. It gives you elite control over every piece of your controller: customize button mapping, adjust stick & trigger sensitivity, vibration control and create macros with any button combination.

FAQ

    Manual setting
  • Press the button combos below for 3 seconds to enter manual setting(LED will blink twice), USB Wireless Adapter 2 will not switch mode automatically.

  •     VIEW + UP  = Xinput mode
  •     VIEW + LEFT  = Dinput mode
  •     VIEW + RIGHT  = Mac mode
  •     VIEW + DOWN  = PSC mode
  •     VIEW + LB  = Switch mode
  •     VIEW + UP + LEFT  = MD mode

  • * Automatic mode switch supports Windows and Switch only. Press the button combos to switch other modes.
  • * Press pair button on the USB Wireless Adapter 2 till LED turns off to cancel manual setting（controller needs to be re-paired）
    How do I connect an Xbox wireless controller to an Xbox console after pairing with the USB Wireless Adapter 2？
    Does the headphone jack work via the USB Adapter?
  • No, it does not work.
Submit